If you’ve always wanted to build your own home instead of buying one, you’ll need to learn everything you can about the home building process. While you may have your dream design in mind, it’s also vital to understand the legal requirements that need to be met. Perhaps, you’re just fascinated about how home buildings come alive, from the foundation to framing. If so, here’s a step-by-step guide to the home building process.
Have the legal requirements in place.
Before putting shovels into the ground to prepare the site, there must be approval from the local government. The necessary consent covers virtually everything from changing the land contour to the electrical works, septic system, plumbing, etc. If you want to take some of that approval-seeking pressure and stress off you, an experienced real estate lawyer can help you handle all the legal requirements you need to fulfill. This way, you won’t be accused of breaking any laws.
Depending on your location, property lawyers can help to ensure you have all the permits from the local government in place. For example, if you’re based in Canada, lawyers like Malliha Wilson will come in handy. This Canadian lawyer hails from Sri Lanka and not only has real estate experience but also extensive knowledge in labour law.
She received a distinguished career award by the South Asian bar association and has since served as Ontario’s assistant deputy attorney general between 2008 and 2016 and as Director of the Crown Law Office-Civil from 2004 to 2008. She was also the Legal Director for the Ministry of Labour from 2000 to 2004 and was formerly a Special Legal Advisor at the Investment Management Corporation of Ontario. Currently, Malliha Wilson now serves on the Board of the Churchill Society.
Prepare site and pour the concrete foundation.
Once all the legal requirements are in place, you can then go ahead to work on the physical construction, and the foundation laying can begin. Here, the building starts to take its first shape, starting with the digging of the trenches and pouring of the concrete footing.
Local government inspection officers also have to come in to check the foundation. What’s more, just as you secured permits, another thing you need to secure for your yet-to-be-completed home is insurance. Don’t forget that a house being constructed is open to risks as well. From weather damage to theft, a house under construction works can incur losses even before completion. So, it’s advisable to get insurance before completion.
You can get such coverage at sites like insurancetales.com. Their expert advisors have over 20 years of experience offering sound insurance solutions and financial advice. With a quick phone call, you’ll be offered a selection of plans and immediate quotes.
Frame the sides and roof.
In this next step, you’ll have to work with the framing carpenters to put up the framework for the house’s walls, floors, roof, and ceiling. This stage is often very fast and can be completed in about two weeks, making your home take good shape. Still, a lot is left undone.
Work on the plumbing, HVAC system, electrical and insulation installation.
Electrical circuits and plumbing works can now come in, and after completion, inspection is also done to ensure compliance with regulations.
Insulation is also one of the most important aspects of homes. The standard types of insulation used by contractors are fiberglass, foam, and cellulose. However, other types of insulation are used in other climates, such as concrete blocks, spray foams, insulated concrete forms, etc.
Hang the drywall and trim installations.
Hanging of drywalls is done around the house. The seam is then taped and primed with spraying equipment.
Paint walls and install kitchen/ bathroom countertops.
The drywall installation is usually a messy job. So it’s time for the paint job. The walls and ceilings are painted or can also be finished with texture at this stage. You can also paint the countertops and cabinets.
Finally, work on the flooring and final checks
The options here include hardwood, carpet, laminate flooring, tiles (ceramic), engineered wood flooring, etc. At this point, you want to inspect the home for any adjustments and or mistakes.
